tag:blogger.com,1999:blog-3391168021757249257.post9099194628098295360..comments2023-06-16T07:00:07.562-07:00Comments on Softvelum news: Nimble Streamer, Larix Broadcaster and more: Setting SRT in Nimble StreamerPoloxhttp://www.blogger.com/profile/02546518664503798123noreply@blogger.comBlogger31125tag:blogger.com,1999:blog-3391168021757249257.post-20864636290359804562020-07-04T17:28:57.298-07:002020-07-04T17:28:57.298-07:00You need to check output protocol settings. Also y...You need to check output protocol settings. Also you can set "latency" parameter in Larix and in SRT settings of Larix.Aquaryhttps://www.blogger.com/profile/10690422971056030987noreply@blogger.comtag:blogger.com,1999:blog-3391168021757249257.post-57110874076090909292020-07-04T08:54:19.881-07:002020-07-04T08:54:19.881-07:00Hey, I tryed it with Larix Broadcaster to my own P...Hey, I tryed it with Larix Broadcaster to my own Pc on the Local but i get a delayy of about 8 Seconds how can i get that down ? Anonymoushttps://www.blogger.com/profile/10963349451738526946noreply@blogger.comtag:blogger.com,1999:blog-3391168021757249257.post-56409373718787856082020-03-11T15:22:54.157-07:002020-03-11T15:22:54.157-07:00We don't support it yet. Can you share your us...We don't support it yet. Can you share your use case for SRT on Mac?Aquaryhttps://www.blogger.com/profile/10690422971056030987noreply@blogger.comtag:blogger.com,1999:blog-3391168021757249257.post-70381675139360738522020-03-11T15:20:09.472-07:002020-03-11T15:20:09.472-07:00Is SRT ready for a Mac server yet?Is SRT ready for a Mac server yet?Davehttps://www.blogger.com/profile/07934306491395128848noreply@blogger.comtag:blogger.com,1999:blog-3391168021757249257.post-47219612399803931892020-01-06T20:07:12.961-08:002020-01-06T20:07:12.961-08:00Please feel free to ask questions via https://wmsp...Please feel free to ask questions via https://wmspanel.com/help Aquaryhttps://www.blogger.com/profile/10690422971056030987noreply@blogger.comtag:blogger.com,1999:blog-3391168021757249257.post-57035580052742162442020-01-06T20:04:42.880-08:002020-01-06T20:04:42.880-08:00I need help in installing my SRT can you help me?I need help in installing my SRT can you help me?Anonymoushttps://www.blogger.com/profile/12721272984168766416noreply@blogger.comtag:blogger.com,1999:blog-3391168021757249257.post-74885799374978928732019-06-19T12:58:27.766-07:002019-06-19T12:58:27.766-07:00Thank you Denis for your answer! I was able to con...Thank you Denis for your answer! I was able to configure srt listen mode by putting the ip 0.0.0.0 and any port I want :)light777https://www.blogger.com/profile/16025938034716909498noreply@blogger.comtag:blogger.com,1999:blog-3391168021757249257.post-72814554257290741892019-01-09T02:08:18.682-08:002019-01-09T02:08:18.682-08:00Please use our helpdesk to post sensitive informat...Please use our helpdesk to post sensitive information like IP addresses: https://wmspanel.com/help<br />I'm removing your comment to ensure your safety.Aquaryhttps://www.blogger.com/profile/10690422971056030987noreply@blogger.comtag:blogger.com,1999:blog-3391168021757249257.post-57013853498120587762019-01-09T01:57:31.032-08:002019-01-09T01:57:31.032-08:00This comment has been removed by a blog administrator.Anonymoushttps://www.blogger.com/profile/15152007306519121930noreply@blogger.comtag:blogger.com,1999:blog-3391168021757249257.post-60101654910659350052019-01-09T00:47:05.905-08:002019-01-09T00:47:05.905-08:00Hello.
You can use any port in 1-65535 range, just...Hello.<br />You can use any port in 1-65535 range, just make sure no other processes are using that UDP port, and certainly port must be the same on sender and receiver side. For incoming stream you should simply set IP 0.0.0.0 to listen on any interface, or set the same IP that was used on sender side. Anonymoushttps://www.blogger.com/profile/03239591038668120236noreply@blogger.comtag:blogger.com,1999:blog-3391168021757249257.post-1600359091018073212019-01-08T22:17:12.378-08:002019-01-08T22:17:12.378-08:00Hi there, I have confusion regarding the IP & ...Hi there, I have confusion regarding the IP & port in SRT setting & also in the Incoming Stream setting. Can I assume random port in SRT setting? And in Incoming Stream setting, which interface's IP & port I have to enter? Thank you.Anonymoushttps://www.blogger.com/profile/15152007306519121930noreply@blogger.comtag:blogger.com,1999:blog-3391168021757249257.post-41660843855854090732018-01-05T01:35:33.405-08:002018-01-05T01:35:33.405-08:00Hello,
Please contact us via https://wmspanel.com...Hello,<br /><br />Please contact us via https://wmspanel.com/help so we could follow up with your server settings.<br /><br />Thank you.Aquaryhttps://www.blogger.com/profile/10690422971056030987noreply@blogger.comtag:blogger.com,1999:blog-3391168021757249257.post-53023520911951584482018-01-05T01:24:10.148-08:002018-01-05T01:24:10.148-08:00please someone managed to stream SRT from Teradek ...please someone managed to stream SRT from Teradek cube to nimble?<br />Teradek with server mode disabled, Passphrase, Encryption Key Size <br />Nimble in lissen, local ip to 127.0.0.1, Passphrase, Encryption Key Size<br />Everything seems fine, but I can not start the stream.Anonymoushttps://www.blogger.com/profile/04044105586647940205noreply@blogger.comtag:blogger.com,1999:blog-3391168021757249257.post-48459353661163585942017-07-30T20:10:13.462-07:002017-07-30T20:10:13.462-07:00Hello,
You are right, you need to define outgoing...Hello,<br /><br />You are right, you need to define outgoing stream for MPEGTS-based streaming. It's always set like that in Nimble just because there may be multiple programs inside of one MPEGTS stream. So to give capabilities our customers to generate any combination of output streams, we made it that way.<br />Please refer to this article for more details: http://blog.wmspanel.com/2015/07/advanced-mpegts-delivery-udp-nimble-streamer.html<br />Aquaryhttps://www.blogger.com/profile/10690422971056030987noreply@blogger.comtag:blogger.com,1999:blog-3391168021757249257.post-54108433282513564872017-07-29T13:14:00.525-07:002017-07-29T13:14:00.525-07:00one thing i learned about SRT and the whole nimble...one thing i learned about SRT and the whole nimble system in general is that you must have an output for everything.<br /><br />so when you have an MPEGTS udp input for example, you must create some output for it to be available for inclusion into an SRT stream.<br /><br />you can not just go from a nimble input directly to SRT, it must go to an nimble output to be included in an SRT Stream... or any stream for that matter. <br /><br />on the receive side, when you accept the SRT as an MPEGTS input, you must then send it to an MPEGTS output one for each program in the SRT stream<br /><br />you may then stream them out using the UDP streamer.photonicahttps://www.blogger.com/profile/12410268759176288350noreply@blogger.comtag:blogger.com,1999:blog-3391168021757249257.post-13634230253495986662017-07-26T15:56:29.910-07:002017-07-26T15:56:29.910-07:00That is any stream which is available in Nimble St...That is any stream which is available in Nimble Streamer. Check Nimble Streamer -> Live Streams menu and go to Outgoing streams page.Aquaryhttps://www.blogger.com/profile/10690422971056030987noreply@blogger.comtag:blogger.com,1999:blog-3391168021757249257.post-29878884916072181512017-07-26T13:49:41.187-07:002017-07-26T13:49:41.187-07:00This comment has been removed by a blog administrator.Anonymoushttps://www.blogger.com/profile/11399812103664894152noreply@blogger.comtag:blogger.com,1999:blog-3391168021757249257.post-83630069535342637862017-07-26T11:35:21.333-07:002017-07-26T11:35:21.333-07:00Can you please comment on the Source naming struct...Can you please comment on the Source naming structure.photonicahttps://www.blogger.com/profile/12410268759176288350noreply@blogger.comtag:blogger.com,1999:blog-3391168021757249257.post-28672541755178114992017-07-25T17:08:23.716-07:002017-07-25T17:08:23.716-07:00MPTS on received network is not identical as Nimbl...MPTS on received network is not identical as Nimble receives and demuxes mpts and in case if you need to produce mpts on receiver you will have to use http://blog.wmspanel.com/2015/07/advanced-mpegts-delivery-udp-nimble-streamer.html<br /><br />i.e nimble receives mpts stream demux into several streams then combine into MPTS before sending to destination. Nimble will be send input MPTS stream without modifications. It will get input stream demux it and send MPTS stream produced by Nimble not original. Poloxhttps://www.blogger.com/profile/02546518664503798123noreply@blogger.comtag:blogger.com,1999:blog-3391168021757249257.post-89570088019657305692017-07-25T09:44:30.823-07:002017-07-25T09:44:30.823-07:00please explain:
source application name: what ar...please explain: <br /><br />source application name: what are valid choices, how do you KNOW they are valid names.<br /><br />SRT source IP : do you send the SRT to the IP of the remote device ? or the ip address of the device sending the SRT out<br /><br />can you retransmit an MPTS on the receiver sides network that was sent using SRT so that the MPTS released on the receiver sides network is identical to the original MPTS used to create the SRT transmitters source streams?<br /><br />in other words .... <br /><br />ENCODER--> MPTS--> SRT Transmit--> INTERNET--> Receive SRT--> MPTS--> network photonicahttps://www.blogger.com/profile/12410268759176288350noreply@blogger.comtag:blogger.com,1999:blog-3391168021757249257.post-8115992190069629442017-07-23T16:57:47.025-07:002017-07-23T16:57:47.025-07:00No, it's not included. You need to install it ...No, it's not included. You need to install it separately: https://wmspanel.com/nimble/srt_install#os_windows Aquaryhttps://www.blogger.com/profile/10690422971056030987noreply@blogger.comtag:blogger.com,1999:blog-3391168021757249257.post-83477809613930233362017-07-23T12:10:05.500-07:002017-07-23T12:10:05.500-07:00does the windows install version of nimble streame...does the windows install version of nimble streamer automatically include SRT functionality ?photonicahttps://www.blogger.com/profile/12410268759176288350noreply@blogger.comtag:blogger.com,1999:blog-3391168021757249257.post-62536859280966284262017-07-23T05:50:43.739-07:002017-07-23T05:50:43.739-07:00Thanks for great question!
Nimble can send and get...Thanks for great question!<br />Nimble can send and get MPTS over SRT and we hope this ability will be very welcomed among our clientsPoloxhttps://www.blogger.com/profile/02546518664503798123noreply@blogger.comtag:blogger.com,1999:blog-3391168021757249257.post-74619511901832422632017-07-22T13:03:11.610-07:002017-07-22T13:03:11.610-07:00hello,
Can I send an MPTS using SRT or is it req...hello, <br />Can I send an MPTS using SRT or is it required to be broken up into individual streams ?photonicahttps://www.blogger.com/profile/12410268759176288350noreply@blogger.comtag:blogger.com,1999:blog-3391168021757249257.post-39504151325816220952017-07-16T02:53:56.983-07:002017-07-16T02:53:56.983-07:00Hi,
we don't support SRT for raspberry pi now ...Hi,<br />we don't support SRT for raspberry pi now so please consider linux/Windows for nowPoloxhttps://www.blogger.com/profile/02546518664503798123noreply@blogger.com